Top 10 typical forklift crashes ， forklift operation must focus on these matters ！.

Top 10 typical forklift crashes ， forklift operation must focus on these matters ！.

Blog Article

Don't take too lightly the forklift at the workplace. If the operation is bad, there will be major mishaps in minutes, and there are lots of crashes including forklifts.

Situation 1: The forklift freight obstructed the vehicle driver's sight, and the individual ahead can not be found, leading to a rolling mishap.
Case 2: In order to keep the equilibrium of the forklift when raising heavy products, the staff members utilized their body weight as the weight, which nearly caused casualties.
Case 3: The size of the forklift cargo exceeds the allowable width of the route and holds on the roadside shelf, which practically creates an mishap.
Case 4: Forklift is speeding and rolls over during a turn.
Case 5: The forklift motorist did not discover the pedestrian, and the pedestrian did not discover the forklift.
Instance 6: The forklift lifts the personnel unlawfully, the forklift chauffeur does not wear the seat belt, the forklift lifter falls and the chauffeur is squashed when the forklift surrender.
Case 7: The forklift driver did not put on a safety belt and fell from the vehicle when it rolled over and was squashed.
Forklift operation need to take note of these issues ：.

Start.
1. Before starting, observe the surroundings, and after validating that there are no barriers that prevent the safety and security of driving, beep the horn first and then start.
2. For automobiles with hydraulic (air pressure) brakes, the brake hydraulic pressure (air pressure) scale should be secure before starting.
3. When the forklift begins with a load, the driver must initially confirm that the lots is secure and reputable.
4. The beginning should be slow-moving and consistent.

Driving.
1. When driving, the elevation between the bottom end of the fork and the ground ought to be kept at 300mm-400mm, and the pole needs to be tilted backwards. .
2. Do not lift the fork too expensive when driving. When getting in and leaving the work website or while driving, beware that there will be no barriers overhead. When the load is traveling, the fork must not be raised too high, which will certainly affect the stability of the forklift. .
3. After discharging, the fork ought to be lowered to the regular driving setting prior to driving. .
4. When transforming, if there are pedestrians or automobiles nearby, the driving signal ought to be released first. High-speed doglegs are banned. High-speed doglegs will certainly trigger the car to shed lateral security and topple. .
5. When the forklift is downhill, it is purely forbidden to shut off the fire and slide, and it is prohibited to brake suddenly while driving with lots unless there are special conditions.
6. When the forklift is running, it should comply with the web traffic rules in the manufacturing facility and have to keep a certain security distance from the vehicle in front. .
7. When the forklift is running, the tons must be in the most affordable position that does not impede the driving, and the gantry needs to be correctly tilted back. The lots shall not be increased other than when piling or loading. .
8. The height of the tons have to not block the motorist's view. In special scenarios, when the product influences the forward vision, drive at a reduced rate when reversing.
9. It is forbidden to turn on the ramp, nor to drive throughout the ramp. .
10. The safe driving speed of the forklift in the factory location is 5 km/h, and it should drive securely at a low rate when getting in the manufacturing workshop area. .
11. When the Stand-on Electric Pallet Stacker forklift is raised, lifted or driven, it is prohibited for employees to stand on the fork to hold items and play a balancing function. .
12. If issues are discovered, they will be repaired and reported in a prompt fashion, and they will certainly never ever run with illnesses or conceal them.

loading and unloading.
1. When fork-loading items, the distance in between the two forks ought to be adjusted as needed to make the lots of the two forks well balanced and not skewed, and one side of Electric Forklift Truck for Warehouse the product need to protest the shelf. .
2. It is prohibited to deal with a single fork or make use of a fork top or draw. In special situations, safety warning signs need to be established to advise bordering pedestrians. .
3. In the process of filling and unloading products, the forklift has to be braked with the brake. .
4. The rate of the car need to be sluggish and constant. Beware not to roll the wheels on the dunnage, so as not to stretch the rolled things and hurt individuals. .
5. When utilizing a fork to fork the goods, the fork needs to be as deep as possible under the tons, and it must be kept in mind that the fork pointer ought to not touch various other items or objects. The lots ought to be maintained with marginal back tilt of the gantry to ensure that the load does not move backwards. The mast can be tilted forward slightly when the tons is reduced to permit very easy positioning of the lots and extraction of the forks. .
6. It is prohibited to fork products at broadband and ram tough things with the fork head. .
7. When the forklift is functioning, it is forbidden for people to stand around the fork, so as to prevent the collapse of the goods and harm people. .
8. Overwhelming is forbidden, and it is restricted to use forks to lift employees to take part in high-altitude procedures to prevent high-altitude dropping accidents. .
9. It is not permitted to make use of the brake inertia to slide, put, round or roll objects. .
10. It is not permitted to make use of forks to choose, turn pallet discharge.

Leaving .
1. It is prohibited to leave the forklift when the items on the fork impend. Before leaving the forklift, you need to dump the goods or lower the fork structure.
2. Pull the hand brake manage to dead or depress the parking brake button.
3. The engine is shut off and the power is removed. (Except for unique scenarios, such as the vehicle driver does not leave the automobile's line of sight and does not go beyond 1 minute).
4. Get rid of the secret. .

Forklift Operation Precautions.
1. Prior to and after the forklift procedure, the appearance ought to be examined, and fuel, lubricating oil and air conditioning water should be added.
2. Examine the safety performance of beginning, running and stopping.
3. Inspect whether the lights and horn signals are full and efficient.
4. Throughout the operation of the forklift, inspect whether the pressure and temperature level are regular.
5. After the forklift is running, the external leakage needs to also be inspected and the seals need to be replaced in time.

Forklift Safety Operation Specifications.
1. You should inspect before leaving the automobile;.
2. When you experience someone in front of you during driving, you need to send out a signal at a distance of 5 m;.
3. The driving rate in the manufacturing facility does not go beyond 5 km/h;.
4. When driving, the low point of the cargo ought to be 0.3 m ~ 0.4 m above the ground;.
5. The turning should not be too sharp to prevent the tendency of "free switching";.
6. Adding and down the slope needs to be sluggish and uniform, and no switching on the incline is allowed.
7. Do not drive across the slope. When the slope is above 10%, the vehicle must be driven backwards when declining;.
8. When the forklift personnel bring the goods and progress, if they experience large or hefty goods and most likely to the vehicle driver's line of sight, they should take the reversing workout
.
The "Eight Prohibitions" ought to be adhered to in the operation.
1. Solitary fork operation is not permitted.
2. It is not enabled to lift the goods for long distance driving.
3. It is not permitted to pick up the goods by turning over the pallet with the fork.
4. It is not permitted to directly shovel chemicals, flammables and other harmful chemicals with forks.
5. It is not allowed to make use of inertia pressure to get the goods.
6. It is not permitted to utilize stopping force to expatriation round or easy-to-roll things.
7. It is not enabled to bring individuals to work with the pallet or fork, and it is strictly prohibited to stand under the fork after the fork is elevated.
8. Do not drive side to side on inclines
.
Vehicle parking is not allowed under the list below problems.
1. Contours, slim roadways, train crossings;.
2. Areas with a longitudinal incline greater than 5%.
3. When there is an obstacle on one side of the road, the opposite side of the section with the same length as the obstacle should be within 20 meters at each end.

Web：https://www.onenforklifts.com/
Email：[email protected]
Phone：+86 13827083844